When you are planning a road trip with your spouse, family or with your friends, there are many ways that you can use to generate electricity. The most common option used by most people is a gasoline generator. However, the better alternative of generating power will be to use a portable solar panel.
The best thing about the portable solar panel is that it has a low running cost, requires very minimal maintenance and that it does not generate any form of pollution to the environment. On top of this, you need not worry about packing enough liters of gasoline during your road trip as they only require you to mount the solar panels in an open space where there is direct sunlight.
Before opting to use a portable solar panel for your road trip, it will be best for you together with your group of friends, family or your spouse to make early preparations. In your preparations, you will need to familiarize yourself with a few things about portable solar panels as discussed below.
Are you familiar with the way electricity works? Are you able to read and use an electrical wiring diagram correctly? Finally, just by going through the user manual, will you be able to configure the electronic components of the portable solar panel? Now, these are some of the questions that you ought to ask yourself even before you begin building your solar panel system.
How a portable 4WD Supacentre solar panel system works is very simple. Its key components include the charge controller, the solar panels, power inverter and the battery bank. The solar panels are created from a type of semi-conductive material that is known as Photovoltaic cells.
The photovoltaic cells can generate electrical currents when they are exposed to the sun. If you have a caravan, it will be a good idea for you to set up the large group of 4WD Supacentre solar panels on the ground.
After setting up the solar panels, the second step is to connect the solar panels to the charge controller using two copper cables. One of the copper cables will be a positive run cable, and the other one is a negative run cable. The charge controller will utilize the electrical currents from the photovoltaic panels to charge the battery bank.
The battery bank size that you ought to use depends entirely on the size of the caravan. As a general rule, two units of the battery will furnish you with sufficient electricity to last a family throughout the entire night. In case you are going camping with a large group then you will only increase the number of batteries as required.
A power inverter will assist you in converting the stored Direct current to Alternate Current that you will use in all your electrical equipment. From the power inverter, the final step will be to run an extension cable that will supply the electricity throughout the caravan. You must read this: http://www.huffingtonpost.com/2013/11/29/solar-power-connecticut-green-energy_n_4359785.html.